Skip to content

DC5V30A 150W LED Driver

  • Universal switching mode power supply. Input: AC 110V / 220V, 50 / 60Hz ; Output: DC 5V, Max 30A, 150W. The default output voltage is 5V DC, but it can be regulated by 10%, from 4.5V to 5.5V. Two sets of output channels available.
  • It can supply with all amperage less than 30A. —such as 1A, 6.5A, 15A, 20A, 30A. For example, if your device draws 18A, then 18A will be supplied. If draws more than 30A, only 30A will be supplied and power supply will be damaged soon. NEVER OVERLOAD!
  • We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection.
  • Compatible: WS2812B WS2811 WS2801 APA102 SK6812 WS2813 LED Strip Pixel light/ USB-HUB / Graco Swing / Home Phone System / VoIP Phone Router / Serato DJ Controller / Nextbook / Webcam Router / Toy / Recorder / Bluetooth Speaker / Scanner / DVR / Hard Disk Box and other 5v devices less than 150W.
  • There is no built-in fan, silent running. Metal case with many holes makes heat dissipation more efficient. It comes without any power cord.

Parameter

  • Input: AC 110V/220V,50/60Hz
  • Output Voltage: DC 5V ( regulated by 10% )
  • Output Current: Max 30A
  • Output Wattage:Max 150W
  • Size: 7.87in(L) x 3.85in(W) x 1.65in (H)
  • Material: Metal, Electronic Parts
  • Safety Compliance: FCC / CE/ RoHS / CCC
  • Fix Screw Hole Diameter: 2.5mm (0.1inch)
  • Working temperature: -10°C to 60 °C
  • Environmental humidity: 10%-95%
  • Weight: 1.1 lb / 500g

Package included:

  • 1x 5V 30A power supply (power cord is not included)

Kindly note

  • 110V/220V must be selected by switch before using to avoid damaging. The power select (110v/220v) switch is located inside the case. Please use a small screw driver to reach in and change the switch to 110V for USA.
  • It comes without installation instruction, power cord, on/off switch and screws. Professional installation of licensed electrician is highly recommended.
  • High voltage inside, NEVER remove the cover. Not waterproof, indoor use only.
  • Make sure your device match the 5V voltage and wattage less than 150W. Please don’t run it overload
  • The max use should be no more than 80% of the full loads,otherwise, the service life of the power supply will be greatly shortened.
  • We recommend you to use this 5V 30A 150W power supply to power devices less than 120W.

Connection instruction

  • L: AC Live Wire
  • N: AC Neutral wire
  • +V:DC 5V+
  • COM: DC 5V-
  • +V ADJ: Adjust output voltage by 10%