1.Remote Distance :>20meters
2.Operating Temp.:-20℃- 55℃
5.Remote Control Freq.: 433MHz RF
6.Power Supply:2*AAA battery ( Products do not contain batteries)
7.TX Power: 6db
8.Standby Power Consumption:10uA
9.Receiver input:DC5V-DC24V(the same as the led strip) the receiver input voltage must be the same as the LED Strip
10.Output :Digital Signal ,Max 1000ICs
11.Operating Noise Level:<80dB
12.Supporting ICs: 1903,2811,WS2812B,6803,6812,WS2813
13.Can not support the 5050 RGB led strip（which has no IC） or 5050 RGBW led strip（which has no IC）
1.The user manual is very important , please read it carefully if you don’t know how to use it .
2.Q:How to pair the Remote to the receiver ?
A:Please check for the PIC5(piture 5) on the user manual .
3.Q:How to select the ICs type of the LED Strip
A:Please check for the PIC6(piture 6) on the user manual .
4.Q:Calibrate the Strip illuminate RGB
A:A:Please check for the PIC7(piture 7) on the user manual .