Skip to content

DC5V 12V 24V SD Card Programmable Pixel LED Controller H801SB

First, the introduction

The H801SB is a simple controller with single-port output. It has three modes and can control a variety of single and dual-line driver chips, up to 2048 points. The supporting software is LED programming software.
Second, controllable driver chip
LPD6803, LPD8806, LPD1882, LPD1889, LPD6812, LPD1883, LPD1886, DMX512, HDMX, APA102, MY9221, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, UCS8904, WS2801, WS2803, WS2811, WS2812, TM1803, TM1804, TM1809, TM1812 TM1829, TA9912, TM1913, TM1914, TM1926, TM1814, INK1003, LX1003, LX2003, LX2006, TLS3001, P9813, P9816, SM16711, SM16716, LD151x, LD153x, MBI6021, MBI6023, MBI6024, and the like.
Third, the performance characteristics
1, an output port, up to 2048 pixels.
2. The SD card supports FAT32 and FAT16 formats, and the maximum capacity is 32G bytes and above. A maximum of 32 DAT files are allowed, and the playback order is that the file names are sorted alphabetically.
3. Three control modes: SD card control mode, internal control mode, and DMX control driver chip mode.
4. H801SB can address the DMX chip of Tianwei and Lienian.
5, through the differential signal line, to achieve multiple synchronous playback.
6, two voltage input, DC5V or DC9-24V.
7, through the button to switch files, adjust the playback speed, set the full broadcast or unicast.
Fourth, the controller interface definition
Connect GND, DAT when controlling single-line driver IC
Connect GND, CLK, DAT when controlling the two-wire driver IC
Connect GND, D-, D+ when controlling DMX512
Five, specifications
Input voltage DC5V or DV9-24V
Power consumption 0.3W
Number of points loaded 2048 points
Weight 0.1Kg
Working temperature -20C°–75C°
Dimensions L150 x W82 x H38