AC110V/220V to DC12V10A 120W Power Adapter

  • Universal switching mode power supply. Input: AC 110V / 220V, 50 / 60Hz ; Output: DC 12V, Max 10A 120W. Two output ports. Each port outputs 0~10A automatically to match your device, 10A max in total for 2 ports. The default output voltage is 12V, but it can be regulated by 10%, from 10.8V to 13.2V.
  • It can supply with all currents less than 10A, such as 1A, 2A, 3A, 4A, 5A, 6A, 7A, 8A, 9A, 10A. For example, if your device draws 7.5A, then 7.5A will be supplied. If draws more than 10A, only 10A will be supplied and power supply will be damaged soon. NEVER OVERLOAD !
  • Certified by FCC CE ROHS. We focus on producing high quality power transformers. Automatically over-current cut-off, over-voltage cut-off, over -temperature cut-off, short circuit protection. Low noise, no spontaneous combustion, no explosion, no fire hazard, stable output, safe to use.
  • It is widely use to driving 12V LED strip light, flood light, commercial lighting project, wireless router, ADSL cats, HUB, home security cameras, audio/ video devices, 3D printer, CCTV DVR NVR Surveillance System, LCD/LED monitor screen, webcam router, speaker or other 12V devices less than 120W.
  • There is no cooling fan in the case, silent running. Aluminum case with many holes improves heat dissipation efficiency to avoid overheating.

Parameter
Input: AC 110V/220V, 50/60Hz
Output Voltage: DC 12V ( Regulated by 10% )
Output Current: Max 10A
Output Wattage:Max 120W
Size: 20cm/7.9in x 10cm/3.94in x 4.2cm/1.6in
Material: aluminum, electronic components
Safety Compliance: FCC / CE/ RoHS / CCC
Fix Screw Hole Diameter: 2.5mm (0.1inch)
Working temperature: -10°C to 60 °C
Environmental humidity: 10%-95%
Weight: 1.1 lb / 500g

Package included:
1x 12V 10A power supply (power cord is not included)

Kindly note
1.110V/220V must be selected by switch before using to avoid damaging. The power select (110v/220v) switch is located inside the case. Please use a small screw driver to reach in and change the switch to 110V for USA
2.It comes without installation instruction, power cord, on/off switch and screws. Professional installation of licensed electrician is highly recommended.
3.High voltage inside, NEVER remove the cover. Not waterproof, indoor use only.
4.Make sure your device match the 12V voltage and wattage less than 120W. Please don’t run it overload.
5.If there is any issue with the power supply, please feel free to contact us by email. We will solve the problems for you within 24 hours.

Connection instruction
L: AC Live Wire
N: AC Neutral wire
〨: Ground
+V:DC 12V+
-V: DC 12V-
+V ADJ: Adjust output voltage by 10%

Professional advice from licensed electrician:
The max use should be no more than 80% of the full loads.
Otherwise, the service life of the power supply will be greatly shortened.
We recommend you to use this 12V 10A 120W power supply to power devices less than 96W.