- Brand:Magic LEDPro
- IC type :SK6812
- LED: 5050RGB
- Gray level: 256
- View angle: 120°
- Input voltage: DC5V
- Color: full color 24-bit
- FPCB board color: Black/White
- Power:9W/m 0.3W/LED 30LEDs/m total 45W
- Recommended power supply:DC5V10A (50W)
- Standard Reel Length:16.4FT/reel 5meters/reel
- Model: WS2812 strip 5050rgb chips
- Operating Temperature: -20 ~ +40°C
- Length xWidthx Height:5000mmx10mmx2mm
- Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm
- Waterproof level: IP30 non-waterproof/IP65/IP67
Features
Addressable
- Every led has its own IC chip. One IC drives one led. The chip is built-in the LED.Biult-in IC chip .
Cuttable
- Cut it to the length you just need.
- Every LED can be cut off, led strip still working after it is cut.
DIY Project
- You can use this led strip to make a LED matrix panel, TV/PC backlight, laser sword or light stick. Various DIY project.
Easy to install
- 3 pin connectors on both ends for easy installation, you can also add another LED on both ends.Connect them in series.Technicians are available for installation . Welcome to consult
Adhesive
- They (IP30, IP65) has adhensive tape on the back.You can paste it on the bookcase, TV, wine cabinet, ceiling, windowsill easily.
- IP67 has NO adhesive on its back.
Application
- LED strip can be used for decorating your home (e.g. dining room, bed room, upstairs, kitchen, porch, desk, and living rooms, especially great for holidays and events like Christmas, Halloween, Parties)
Precautions
- Using voltage DC5V, higher than 5V will destroy it.
- If you need better led strip performance, you can use an Android/IOS bluetooth controller SP105E&SP110E, music controller CSY08&SP107E, WiFi controller SP108E,Alexa controller SP501E or a programmable controller K-1000C. It also works with Amaozn alexa controller .
- It is better to add DC5V voltage every 16.4FT, because the LEDs at the far end of the strip might be dimmer due to the added resistance and voltage drop that occurs as the current flows to that end of the strip.
- LED strip is made by 50cm FPCB, so there is a solder point each 50cm(1.6FT) on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths.