Skip to content

5M 150Pixel DC5V SK6812 Black Addressable LED Strips

  • Individually Addressable.Dream full color Programmable LED Strip, SK6812 IC Built in 5050SMD.256 brightness display and 24-bit color display.
  • It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
  • The addressable IC is built-in the 5050SMD.Each pixel can have its own color and brightness as your wish. Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. Support SP110E SP105E SP108E SP110E etc APP controllers, CSY07 CSY08 X2 SP106E SP107E etc music controllers, SP501E etc smart WiFi Alexa Controllers.
  • Only Support DC5V. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.
  • Making led screen, led wall, advertising board, apply to hotel, KTV, bars, Outdoor advertising signs, Festivel Christmas or wedding party decoration,It has adhesive glue on the back, so you can stick it to the wall or other items conveniently as you like.
  • Brand:Magic LEDPro
  • IC type :SK6812
  • LED: 5050RGB
  • Gray level: 256
  • View angle: 120°
  • Input voltage: DC5V
  • Color: full color 24-bit
  • FPCB board color: Black/White
  • Power:9W/m 0.3W/LED 30LEDs/m total 45W
  • Recommended power supply:DC5V10A (50W)
  • Standard Reel Length:16.4FT/reel 5meters/reel
  • Model: WS2812 strip 5050rgb chips
  • Operating Temperature: -20 ~ +40°C
  • Length xWidthx Height:5000mmx10mmx2mm
  • Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm
  • Waterproof level: IP30 non-waterproof/IP65/IP67



  • Every led has its own IC chip. One IC drives one led. The chip is built-in the LED.Biult-in IC chip .


  • Cut it to the length you just need.
  • Every LED can be cut off, led strip still working after it is cut.

DIY Project

  • You can use this led strip to make a LED matrix panel, TV/PC backlight, laser sword or light stick. Various DIY project.

Easy to install

  • 3 pin connectors on both ends for easy installation, you can also add another LED on both ends.Connect them in series.Technicians are available for installation . Welcome to consult


  • They (IP30, IP65) has adhensive tape on the back.You can paste it on the bookcase, TV, wine cabinet, ceiling, windowsill easily.
  • IP67 has NO adhesive on its back.


  • LED strip can be used for decorating your home (e.g. dining room, bed room, upstairs, kitchen, porch, desk, and living rooms, especially great for holidays and events like Christmas, Halloween, Parties)


  • Using voltage DC5V, higher than 5V will destroy it.
  • If you need better led strip performance, you can use an Android/IOS bluetooth controller SP105E&SP110E, music controller CSY08&SP107E, WiFi controller SP108E,Alexa controller SP501E or a programmable controller K-1000C. It also works with Amaozn alexa controller .
  • It is better to add DC5V voltage every 16.4FT, because the LEDs at the far end of the strip might be dimmer due to the added resistance and voltage drop that occurs as the current flows to that end of the strip.
  • LED strip is made by 50cm FPCB, so there is a solder point each 50cm(1.6FT) on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths.