Skip to content

12V-24V PIR Sensor LED Dimmer Switch Motion Function Controller

  • Power supply voltage:12-24V, Current: 6A
  • Delay Time: 1-10 min(adjustable). Induction distance: 5 ~ 8M
  • Infrared detection controller, adopt infrared detection way to control load switch
  • The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceased
  • The field of view of the PIR Dome Lens is 60 degrees nominal

Application & Specification

Direction for use:

  • The human body induction switch is a kind of infrared detection controller, adopt infrared detection way to control load switch. Users can according to actual needs, installed the human body sensors in the appropriate environment.
  • Connect the load wire at first, following by the power wire; Please ensure short circuit cannot occur between connecting wire before you turn on the power; when detected somebody, the load light will bright, when people leave time up to the setting of the delay time, the load lights will automatically turn off.
  • Controller signal output line and input line should be connected correctly.
  • Power supply voltage: 12-24V
  • Output voltage: 12-24V
  • Induction range: 8m
  • Working temperature: -20 to +60 ℃
  • Induction distance: 5 to 8m
  • Induction angle: 120 degrees
  • Output current: 6A
  • Delay Time: 1-10min(adjustable)